So this build starts out the same as the others. I made a scaled vector blue print of the sword. I transferred the image to a sheet of styrene using a method that involves acetone. With this method, the image is placed face down on the surface you want it applied to, which was styrene in this case. Pure acetone is applied to the back of the image and before it evaporates, which happens very quickly, the print is rubbed with a hard flat object onto the surface of the styrene. Because of the quick evaporation, it's easiest to do small sections at a time. If the styrene is to be your final finished surface, you should try a different approach as pure acetone melts styrene.